The system check cycle for production accuracy is less than 1 millisecond.
Real-time machine status, warning, alarm and fault notifications are available.
It has special functions for easy installation and use.
Thanks to its vacuum function, the stability of the product flow can be achieved.
The robust stainless steel machine body meets international food industry standards.
Polyurethane tape can be supplied as slip, retainer and semi-retainer, depending on product feature and customer’s request. (thickness 0,8 mm)
Narrow bend belts allow short product passes thanks to R 6.5 mm narrow bend belts.
The 15 mm thick aluminum plate with special water channel on the cooled base makes it a strip with both cooling properties and stable body.
The 5 mm thick AISI304 stainless steel body is designed according to the stable and special hygienic design with the profiled stainless steel feet.
Belt wipers can be cleaned with the dirty adjustable belt wiper.
Thanks to its aluminum rubber drum, it has a light diameter Ø110 mm, a thick coating and its surface is ground, providing high holding capacity and long service life.
The hinged stainless steel cover has an ergonomic design.
The container consists of a stainless steel part where the crumbs and scraped residues formed in the machine are collected.
High torque and precision work are achieved by the drive drum shaft driven by the gear motor directly coupled to the worm gear motors.
The belt removal piston is easily removed using the button piston by loosening the band. The tape, which is attached in a short, simple time, is stretched again using a button plunger. In this way, the band assemblies can be made in a very short time.
With the selection of the checkered cable channel, it is expected to be able to wash the machine with water on its cables.
Safety has been designed in accordance with safety precautions in accordance with national and international occupational safety and health regulations.