- Each accu-feed system has at least 7 servomotors.
- All parts are of solid construction.
- Our tapes are FDA food grade certified.
- The system check cycle for production accuracy is less than 1 millisecond.
- Real-time machine status, warning, alarm and fault notifications are available.
- It has special functions for easy installation and use.
- Thanks to its vacuum function, the stability of the product flow can be achieved.
- The robust stainless steel machine body meets international food industry standards.
- Polyurethane tape can be supplied as slip, retainer and semi-retainer, depending on product feature and customer’s request. (thickness 0,8 mm)
- Narrow bend belts allow short product passes thanks to R 6.5 mm narrow bend belts.
- The 15 mm thick aluminum plate with special water channel on the cooled base makes it a strip with both cooling properties and stable body.
- The 5 mm thick AISI304 stainless steel body is designed according to the stable and special hygienic design with the profiled stainless steel feet.
- Belt wipers can be cleaned with the dirty adjustable belt wiper.
- Thanks to its aluminum rubber drum, it has a light diameter Ø110 mm, a thick coating and its surface is ground, providing high holding capacity and long service life.
- The hinged stainless steel cover has an ergonomic design.
- The container consists of a stainless steel part where the crumbs and scraped residues formed in the machine are collected.
- High torque and precision work are achieved by the drive drum shaft driven by the gear motor directly coupled to the worm gear motors.
- The belt removal piston is easily removed using the button piston by loosening the band. The tape, which is attached in a short, simple time, is stretched again using a button plunger. In this way, the band assemblies can be made in a very short time.
- With the selection of the checkered cable channel, it is expected to be able to wash the machine with water on its cables.
- Safety has been designed in accordance with safety precautions in accordance with national and international occupational safety and health regulations.
